APSe1
Manual Acupuncture Point Locator and Trigger Point Stimulator

APSe1
Coming soon

Lorm ipusm

Lorem ipsum dolor sit amet, consectetur adipiscing elit

Download PDF
Buy

Product description

Designed to be a new generation, accurate and easy to use manual acupoint locator and trigger point stimulator. The device is fully equipped with unique functions such as polarity switching, frequency selection and microcurrent stimulation. It has two modes: a treatment mode and an acupoint scanning mode. The treatment mode has 10 adjustable intensity levels and single channel output. It is suitable for trigger point therapy on different parts of the body.

The APS-e1 is a portable and lightweight device designed for electroacupuncture and trigger point stimulation. Its main function is to locate and stimulate specific points on the body by means of electrical microcurrents, with the aim of relieving chronic and acute pain, as well as improving general well-being.

Therapeutic uses

The APS-e1 is especially useful in acupuncture and auriculopuncture treatments, as well as in trigger point stimulation. Its ability to precisely locate and stimulate specific points makes it an effective tool for the relief of muscle pain, joint pain and other related disorders.


In summary, the APS-e1 is an advanced device that combines state-of-the-art technology with a practical design, offering healthcare professionals an effective tool for the precise stimulation of therapeutic points.

Technical characteristics

Battery

  • Specification: 1200mAh 3.7V (rechargeable, lithium-ion)
  • Maximum load current: 0.45A ±10%.
  • Max. operating current: 450mA ±10%.
  • No-output current: 90mA ±10%.
  • Charging time: 5h (from low to full battery)
  • Autonomy: 2.5h (continuous use at maximum power)

Standby current requirement

  • Off current: <30μA

Output parameters

  1. Single channel, 1 mode, 10 intensity levels
  2. Pulse frequency: 1-16 Hz ±6 Hz
  3. Pulse width: 260 μs ±20%.
  4. Output waveform: asymmetrical bidirectional rectangular
  5. Max. current with 500Ω load: VPP 160V (error ±20%); voltage difference between levels ≤30V.

Technical specifications

Feeding

Uses DC5V charging with Type-C charging interface.

Dimensions and weight

  • Size: 216.79 × 29 × 39.91 mm
  • Weight: 76 g

Operating and storage environment

  • Operating conditions:
    • Temperature: 10 °C – 40 °C
    • Humidity: 20%-90% RH
    • Pressure: 70 kPa – 106 kPa
  • Storage conditions:
    • Temperature range: -20 °C – 55 °C
    • Humidity: 15%- 95% RH
    • Pressure: 70 kPa – 106 kPa

Equipment controls

  1. Intensity wheel: adjusts the output intensity (0-10, where 10 is the strongest).
  2. Sensitivity wheel: adjusts the sensitivity for acupoint recognition (0-10).
  3. Frequency wheel: adjusts the frequency (range 1-16 Hz ±6 Hz).
  4. Buzzer volume button: adjusts the volume of the buzzer (clockwise increases, counterclockwise decreases).
  5. Power button: press 1 second to turn on, press and hold for 2 seconds to turn off.
  6. Current application button: press to transmit current at the selected intensity and frequency.

Indicators, display and backlighting

  • Battery display: shows the level with three bars. When depleted, it alarms and shuts off.
  • Loading: loading animation from left to right. When fully loaded, static is displayed.
  • Backlight: white, activated at power on. When charging, it switches off after 10s without use. Can be reactivated with button.

Note: Cannot be used during charging.

Team functions

Application functions

The device has two functions: acupuncture and massage. By default it starts in acupuncture mode.

  • Scan mode: displays the value of the detected point on the LCD. The higher the value, the lower the impedance (max. ~500). The green LED and the buzzer flash according to the detected value.
  • Treatment mode: when the mode button is pressed, it is activated and emits bidirectional rectangular waves.

Timing function

  • Automatic shutdown after 5 minutes of non-use.
  • On load: the backlight turns off after 10s if no button is pressed.

Battery detection and alarm

  • ≥50%: three bars.
  • <50% and >20%: two bars.
  • <20% and ≥5%: one bar flashing.
  • <5%: 0 bars, flashing and automatic shut-off.

Instructions for use

  1. Switch on the device (button 1s). Without pressing the mode button, enter acupuncture mode. Place the probe + electrode on the body; the green LED and the buzzer respond to the detected value (higher value = lower impedance).
  2. Press mode button: enters treatment mode (rectangular wave output).
  3. When released, returns to acupuncture mode. Switch off: press and hold for 2s. If not used for 5 minutes, it switches off
    automatically.

FAQs

The APS-e1 is a state-of-the-art portable device designed for the precise localization of acupuncture points and trigger point stimulation by means of electrical microcurrents. It is mainly used in acupuncture therapies, auriculopuncture and acute or chronic muscle pain treatments.

APS-e1 is intended for health professionals such as physiotherapists, acupuncturists and manual therapists working with trigger point stimulation, acupuncture and auriculotherapy. It is a clinical tool that requires basic training in localization techniques and therapeutic stimulation.

At full charge it provides up to 2.5 hours of continuous use at full power. Charging time is approximately 5 hours.